Propane Gas Tank, Removing/Installing

Removing


WARNING!: Fire hazard! Do not smoke or have anything in area that could ignite propane fuel. Ensure adequate ventilation.


CAUTION: Note safety measures See 'Service Precautions.' Service Precautions

- Open cover underneath left side center floor plate.

- Close bleeder valve -1-.
- Disconnect union -2-.

- Remove two hex nuts -1-.
- Release tension on retaining straps -2- by rotating hex bolts -3-.
- Pull out hex bolts -3-.

Installing
- Install in reverse sequence.


CAUTION: Note safety measures See 'Service Precautions.' Service Precautions