Bedboard and Support Frame, Removing

- Remove cushion padding.







- Pull back catch -1- -arrows- and take bedboard -2- out of vehicle.
- Remove side panel molded trim at rear left/right.
- Remove tool kit.







- Remove support frame bolts -1-, -2- and -3-.
- Lift support frame at back -arrow- and remove left or right.
Tightening torques:
Hex bolt -1- = 22 Nm (16 ft lb)
Hex bolt -2- = 20 Nm (15 ft lb)
Hex bolt -3- = 40 Nm (30 ft lb)