(Left), Components

NOTES:
- Removal description is given for only one side, other side is mirror image.
- Depending on equipment installed, remove seats and/or seat benches See 'Body And Frame, Seats.' Service and Repair , for storage area See 'Accessory Compartment.'
- To remove rear side panel molded trim, remove rear headliner trim, left upper B-pillar trim, left C-pillar trim, D-pillar trim, loosen rear edge cover on both sides. See 'Body And Frame, Interior Trim.'






1 - Clip
- Two-piece
- Removing: Remove inner part with Allen wrench
- Installing: Press outer part and inner pan into hole simultaneously
2 - Cap
- From 12/91
- Up to 11/91, clip, item 1
3 - Trim plug
- From 12/91
- Up to 11/91, clip, item 1
4 - Clip
- On back
- Several located along window edge
5 - Rear side panel molded trim
- Removing/Installing See 'Trim Panel.' Service and Repair
6 - Spring clip
7 - Phillips screw
- with cap
8 - Spacer
9 - Hex bolt
- 40 Nm (30 ft. lb)
10 - Cover
11 - Trim plug
12 - Belt guide with closure strip
13 - Phillips screw
14 - Cover
15 - Door stop cover