Parallel Movement, Checking and Adjusting

Parallel Movement, Checking And Adjusting

Checking
- Close sunroof.







- Slide sun shade - 1 - back.
- Slide trim frame - 2 - back (clipped and fastened with Velcro strip - 3 - in front and guided by pin in rear).







- Latching hook (with roller) - 1 - must be engaged in guide rails.

NOTE: When moving sunroof from open position to closed position, latching hook engagement is audible. If parallel movement is adjusted properly, engagement occurs on both sides at the same time.







- Bolt - 1 - must be within markings (notches) - arrows -.

If not, adjust parallel movement as follows:

Adjusting
Sunroof, removing
Drive motor, removing







- Latching hook (with roller) - 1 - must be engaged in guide rails.







- Slide rear guides with bolt - 1 - only from forward to back between notches - arrows -.
- Install drive motor (0 position) only in this position.
- Install sunroof panel.