Individual Folding Seat, Installing Seat Back Cover

Individual Folding Seat, Installing Seat Back Cover







- Make four upholstery wires (2.0 mm or approx. 5/64 in. dia.) to following dimensions:
a = 360 mm (approx. 14.0 in.)
b = 320 mm (approx. 12.5 in.)

- Make one upholstery wire (2.0 mm or approx. 5/64 in. dia.) to following dimensions:
a = 320 mm (approx. 12.5 in.)
b = 280 mm (approx. 11.0 in.)







- Insert upholstery wires (2.0 mm or approx. 5/64 in. dia.) in seat cover loop straps as shown.
1 =280 mm (approx. 11.0 in.)
2 =320 mm (approx. 12.5 in.)







- Place seatback cover on cushion.
- Clamp upholstery wires - 1 - and - 2 - on wire in seatback cushion (arrows), use upholstery pliers VAG 1634 or equivalent.







- Pull seatback cover over cushion.
- Close zipper - 1 -.
- Insert two prepared upholstery wires in edge loops (arrows), staple together with upholstery clips using upholstery pliers VAG 1634 or equivalent.