Exploded Views

CAUTION: Before working an the electrical system, obtain radio security code, turn oft ignition and disconnect battery Ground (GND) strap.


NOTE:
- Troubleshooting:
See 'Testing and Inspection.' Testing and Inspection


1 - Relay plate
2 - CCS switch -E45-
3 - Vacuum pump bracket
4 - Vacuum hose
- Checking for leaks Testing and Inspection
5 - Hex nut M5
- 3 Nm, (27 in lb)
6 - CCS vacuum pump -V18-
- Removing
See Fig. 4.
7 - Hex nut M8
- 16 Nm, (12 ft lb)
8 - Washer
9 - Positioning element on accelerator pedal
- Removing
See Fig. 1.
- Adjusting
See Fig. 2.
10 - Fillister head self-tapping screw B4.8 x 9.5
11 - CCS control unit
- Behind instrument panel, right
- Removing
See Fig. 5.
12 - Accelerator pedal.
13 - Pop-rivet
14 - Positioning element bracket
- Riveted to pedal cluster
15 - Plastic nut
- 3 Nm, (27 in lb)
16 - CCS wiring harness
17 - Y-fitting for vacuum hose
18 - Vent valve with clutch pedal switch -F36-
- Removing and installing
See Fig. 3.
19 - Vent valve with brake pedal switch -F47-
- Removing and installing
See Fig. 3.
20 - Clip