Instrument Cluster / Carrier

Instrument Cluster, Multi-pin Connector Terminal Assignments







T28 - 28-Pin connection
1 - from outside air temperature sensor indicator (Ground)*
2 - from Engine Coolant Level (ECL) Sensor
3 - Terminal 31, Ground (GND)
4 - Multifunction Indicator (Reset)*
5 - Terminal 31, Ground (GND)*
6 - Multifunction Indicator (Memory)*
7 - Vehicle Speed Sensor (VSS) (-G54- in instrument cluster)
8 - from oil pressure switch 0.9 bar / 1.4 bar / 1.8 bar
9 - from oil pressure switch 0.3 bar
10 - Terminal 1 / Terminal W or Engine Speed (RPM) signal from Digifant Electronic Control Module (ECM)
11 - Terminal 30 (Battery B+)
12 - Terminal 58b (illumination)
13 - Terminal 15
14 - Fog light indicator*
15 - Multifunction Indicator (Mode)*
16 - Terminal 61 - Generator (GEN) control lamp
17 - From oil temperature sensor*
18 - Handbrake/Brake/Seatbelt control lamp
19 - from ambient temperature sensor indicator (signal)
20 - Preglow control lamp (Diesel only)
21 - from fuel level sensor
22 - Left turn signal indicator
23 - from Engine Coolant Temperature (ECT) Sensor
24 - Right turn signal indicator
25 - High beam control lamp
26 - Fuel consumption signal from ECM*
27 - from Vehicle Speed Sensor (VSS) -G22-*
28 - Automatic Transmission Range display (from 08.92)

*) Where applicable