Molded Headliner

NOTE:
- To remove molded headliner in front passenger compartment, remove upper B-pillar trim See Removing/Installing See 'Trim Panel.' Service and Repair - To remove rear molded headliner, remove upper B-pillar trim , C-pillar trim, D-pillar trim, rear headliner trim Removing/Installing See 'Trim Panel.' Service and Repair

1 - Mounting clip
- Two-piece
2 - Front passenger compartment molded headliner
3 - Cover strip
4 - Rear passenger compartment molded headliner
- Removing/Installing See 'Trim Panel.' Service and Repair
5 - Clip
- Six pieces
6 - Clip holder
- Six pieces
- Self-adhesive
7 - Clip
- Eight pieces
8 - Spacer block
- Only on vehicles w/o A/C
- Two-piece
- Self-adhesive, glued to back of molded headliner
- a = 60 mm (approx. 2.4 in.) (back edge cut out for front interior light to front edge of spacer block)
- b = 60 mm (approx. 2.4 in.) (front edge cut out for rear interior light to rear edge of spacer block)