Double Cab Door

1 - Double cab door
- Removing See 'Service and Repair.' Service and Repair
- Installing and adjusting See 'Adjustments.' Adjustments
2 - Operating rod
3 - Door lock
- Removing See 'Body And Frame, Locks.' Locks
4 - Lock cylinder
- Removing: Remove outside door handle -5-, drive out locking pin -6-, remove lock cylinder with key inserted See 'Body And Frame, Locks.' Door Lock Cylinder
5 - Outside door handle
- Removing: Remove screws -7-, remove door handle.
6 - Lock pin
7 - Phillips screw
- 8.0 Nm (71 in. lb)
8 - Phillips screw
- 8.0 Nm (71 in. lb)
9 - Operating rod
10 - Expanding clip
- Removing: Push pin out through expanding clip
- Installing: Press pin in far enough to make it flush with upper edge of expanding clip
11 - Bell lever
12 - Operating rod
13 - Lower hinge
14 - Hex bolt
15 - Lock rod
16 - Inner door opening mechanism
17 - Upper hinge
18 - Trim piece
19 - Lock knob