Exploded Views

CAUTION: Before starting work on the electrical system, obtain radio security code, turn off ignition and disconnect battery Ground (GND) strap.


NOTE: After any work which could affect the headlight setting, the headlight must be adjusted.


1 - Cap
2 - Positioning motor (if equipped)
3 - Adjuster for positioning motor (if equipped)
4 - Left-hand turn signal housing
- Removing and installing See ' Turn Signals, Turn Signal Lamp.'
- Removing and installing turn signal bulb
See 'Turn Signals, Turn signal Lamp.' Service and Repair
5 - Headlight housing
- Removing and installing
See Fig. 1.
- Adjusting headlight
See Fig. 2.
6 - Low and high beam twin filament bulb
Halogen bulb H4
12 V, 60 W/55 W
- Removing and installing
See Fig. 3.