Tail Lamp: Service and Repair

Tail Lights, Servicing

Brake/tail and turn signals, removing and installing







1 - Taillight housing
2 - Gasket
3 - Backup light bulb - left/right 12V / 21W
4 - Turn signal bulb - left/right
- 12V / 21 W
5 - Brake and tail light bulb - left/right
- 12 V, 21 W / 5 W
6 - Bulb holder
7 - Hex nut M5 with washer


Fig. 1 Tail light housing, removing







- Remove connector from bulb carrier.
- Remove hex nuts -arrows-.
- Release lugs -1- and remove housing by turning.
- Reassemble in reverse sequence