Ribbed Belt, Removing and Installing

Belt Drive Without A/C Compressor:

Belt Drive With A/C Compressor:

Basic Belt Drive:

Ribbed Belt, Removing And Installing:

NOTE: Before removing the ribbed belt, mark the direction of rotation. When installing the belt, ensure it is correctly seated in the pulley.

Special Tools, Testers And Auxiliary Items:
^ 3299 Lever

Ribbed Belt, Removing:
- Remove sound dampener tray
- Lift tensioning roller with lever 3299 and remove ribbed belt from generator pulley.
- Remove ribbed belt.

Ribbed Belt, Installing:

NOTE: Before installing the ribbed belt, ensure that all sub-assemblies (generator A/C compressor power steering pump) are tight.

- Place ribbed belt on ribbed bell pulley with vibration damper.
- Lift tensioning roller with 3299 and fit and tension ribbed belt.
- Start engine and check belt running.