Fuel Injection System Components

1 - 10 Nm (7 ft lb)
2 - Oil filler pipe
3 - Bracket for hot air stove
4 - Hot air stove
5 - 25 Nm (18 ft lb)
6 - Fuel rail, lower section
7 - Gasket
^ replace if damaged

8 - Harness connector for injectors
^ 2-pin (49 states)
^ 6-pin (California)

9 - Fuel rail, upper section
10 - Fuel injectors N30, N31, N32, N33, N83
11 - O-ring
^ replace if damaged

12 - Fuel Pressure Regulator
13 - Fuel supply line (black)
14 - Tee connector
15 - Fuel return line (blue)
16 - Retaining clip
17 - O-ring seal
^ replace if damaged

18 - Intake manifold
19 - Ground connection
20 - Positive Crankcase Ventilation (PCV) valve
21 - Engine Coolant Temperature (ECT) Sensor (G62)
^ blue
^ 2-pin
^ relieve cooling system pressure before removing

22 - Overheat fuse F51 and Engine Coolant Temperature sensor G2
^ yellow
^ 4-pin