Fuse/Relay Panel, Removing and Installing Up To 05.96

Central Electric And Relay Panel

Central electric and relay panel > 05.96, removing and installing


NOTE:
- The central electric and relay panel is located under the instrument panel on the left-hand side.
- Removing the instrument panel trim







- Press securing clips -1- on left and righthand side of relay plate in direction of arrow, until the retaining pins -2- on the clips can be pulled out of the recesses on the retainer -4-.
- Swing securing clips -1- forward and pull off relay plate pins -3-.
- Press left-hand retainer -4- outward until pin -5- is no longer engaged in the retainer and then unhook relay plate.


NOTE: When installing, pin -5- and retaining pins -2- must engage in retainer recesses.