Front Side Panel Molded Trim, Removing

Front Side Panel Molded Trim, Removing

- Remove left upper B-pillar trim, left C-pillar trim.
- Remove two-place bench and/or individual seat.







- Remove inner part of clips with Allen wrench.
- Remove hex bolt under cap - 2 - with spacer bushing and, if necessary, belt fitting.
- Remove Phillips screw - 3 - and carefully pry out belt guide with closure strips - 4 - and/or seat belt.
- Loosen left rear side molded trim (short wheel base) or left rear side molded trim (long wheel base) at overlap of front side wall molded trim.







- Unclip front side panel molded trim in following sequence:
- B-pillar - arrow A -
- Window frame - arrow B -







- Remove front side wall molded trim at area of B-pillar and push forward as far as possible.