Test Table

Notes for test table:
^ The socket designations of the VAG1598124 adapter are identical to the terminal designations for the ABS control module (w/EDL) -J104- in the wiring diagram.
^ If the measured values do not match the specifications, carry out the corrective actions on the right side of the table.
^ Use the VAG1594A connector kit for continuity tests (bridging leads).
^ If measured values differ only slightly from specified values, clean sockets and connectors of the testers and test leads (using G 000 700 04 contact spray) and repeat test. Before replacing the relevant components, check wires and connections and also repeat resistance measurement at component, especially for specified values under 10 Ohms.

Electrical test table





Test Step 1





Test Step 2











Test Steps 3 - 4











Test Step 5








Test Step 6








Test Step 7








Test Step 8











Test Steps 9 - 10











Test Steps 11 - 12








Test Step 13








Test Step 14








Test Step 15