Reading

Read measuring value block


WARNING!
Only check wire routing visually!
Do NOT perform any electrical continuity tests or measurements in the ignition circuit!
Make sure ignition is switched OFF before checking wire routing!


- Connect Scan Tool (ST), Initiate On Board Diagnostic (OBD). Scan Tool Connecting and Initial Checks

- Switch printer on via the print-button (indicator lamp in button lights up).

Indicated on display (for current control module versions):

6N0 909 603 AR AIRBAG VW2 V00 ->
Coding 16722 WSC12345


- Press -> button.

Indicated on display:


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -8- to initiate "Read measuring value block", function 08.

Indicated on display:


Rapid data transfer Q
08 Read measuring value block


- Press -Q- button to confirm input.

Indicated on display:


Read measuring value block HELP
Input display group number XXX


- Select desired display group number
- Press -Q- button to confirm input.

Indicated on display:(1...4 = display fields)


Read measuring value block 1 ->
1 2 3 4


The display group number evaluation contains an explanation of the various display field contents. Evaluating Measured Value Blocks

If all display fields indicate "correct":

- Press -> button.







- After -C- button is pressed, the following appears:


Indicated on display:


Rapid data transfer
Select function XX