Differential Fluid - A/T

Tightening Specifications
Differential Check/Filler Plug 20 Nm (15 ft lb)
Left Side Seal and Right Side Seal Up To Dec. 1995
Wheel Bearing Housing To Lower Ball Joint 55 Nm (41 ft lb) + 90° (1/4 turn)

NOTE: Always replace bolt)

Shock Absorber To Axle Link 160 Nm (118 ft lb)
Hex Bolt To Drive Shaft 150 Nm (111 ft lb) + 90° (1/4 turn)

NOTE: Always replace bolt)

Bonded Rubber Mounting To Subframe 200 Nm (148 ft lb)
Wheel Bolts To Wheel Hub 160 Nm (118 ft lb)
Drive Shaft To Drive Flange 70 Nm (52 ft lb)
Right Side Seal From Jan. 1996
Drive Shaft To Drive Flange 80 Nm (59 ft lb)
Bracket To Engine 50 Nm (37 ft lb)
Bracket To Flange Shaft Bearing 27 Nm (20 ft lb)