Front Steering Knuckle

Notes:
^ If it should be necessary to move a vehicle whose drive axle has been removed, install an outer joint in place of the drive axle before removing or else wheel bearing will be damaged.
^ Welding and straightening work on supporting or wheel carrying components of the front suspension is not permitted.
^ Always replace self-locking nuts.
^ Always replace corroded bolts/nuts.

3 - Hex bolt
150 Nm + 90° (1/4 turn)
^ Always replace after disassembly

4 - Socket head bolt, 15 Nm

11 - Hex bolt, 280 Nm
^ M16 x 1.5 x 48

12 - Hex bolt, 355 Nm
^ M18 x 1.5 x48

14 - Multipoint socket, 100 Nm
^ M12 x 1.5 x 55

16 - Multipoint socket, 80 Nm
^ M10 X 48

19 - Hex bolt, 8 Nm