Scan Tool Testing and Procedures

Test Step 1 - 6:

Test Step 7 - 9:

Instrument cluster 05.96 >, multi-pin connector terminal assignments

Pin Locations Inside Connector:

1 - Outside air temperature sensor, ground*
2 - Coolant warning light
3 - Terminal 31, ground
4 - Multi Function Indicator (reset)*
5 - Terminal 31b, ground
6 - Multi-Function Indicator (memory)*
7 - Road speed signal
8 - From oil pressure switch 1.8 bar
9 - Oil pressure switch 0.3 bar
10 - Terminal 1 / Terminal W
11 - Terminal 30, battery positive
12 - Terminal 58b, instrument illumination
13 - Terminal 15
14 - Fog light indicator (if equipped)
15 - Multi-Function Indicator selector switch (mode)*
16 - Generator warning light, terminal 61
17 - Oil temperature sender
18 - Brake, handbrake/seat belt warning light
19 - Outside air temperature sensor, signal*
20 - Malfunction Indicator Lamp (MIL)
21 - Fuel gauge
22 - Turn signal warning light, left
23 - Coolant temperature gauge
24 - Turn signal warning light, right
25 - High beam control light
26 - Fuel consumption signal*
27 - Speedometer Vehicle Speed Sensor (VSS) -G22-, signal
28 - Automatic transmission selector range display

* only on vehicles with Multi-Function Indicator (MFI)