Test Table (Test Steps (17-26)

Notes for test table
^ The socket designations of the VAG1598/20 adapter are identical to the terminal designations for the ABS control module (w/EDL) -J104- in the wiring diagram.
^ If the measured values do not match the specifications, carry out the corrective actions on the right side of the table.
^ Use the VAG1594A connector kit for continuity tests (bridging leads).
^ If measured values differ only slightly from specified values, clean sockets and connectors of the testers and test leads (using G 000 700 04 contact spray) and repeat test. Before replacing the relevant components, check wires and connections and also repeat resistance measurement at component, especially for specified values under 10 Ohms








Test 17








Test 18





Test 19








Test 20








Test 20a














Test 21














Test 22











Test 23














Test 24








Test 25








Test 26