Adapting A New, Additional Key

Adapting A New, Additional Key

Using V.A.G 1551 Scan Tool (ST)

- Connect Scan Tool (ST) , Initiate On Board Diagnostic (OBD).

Indicated on display:


Rapid data transfer HELP
Select function XX


- Press buttons -1- and -0- to select "Adaptation", function 10.

Indicated on display:


Rapid data transfer Q
10 - Adaptation


- Press -Q- button to confirm input. Indicated on display:

Adaptation
Enter channel number XX


- Press buttons -0-and -1-.

Indicated on display:


Adaptation Q
Enter channel number 01


- Press -Q- button to confirm input.

Indicated on display:


Channel 1 .....adaptation 1 ->
Key 1 <-1 3->


The upper tine indicates how many keys are supposed to be adapted (1).

- Press -> button.

Indicated on display:


Channel 1 adaptation 1 Q
Enter adaptation value XXXXX


- Press the -0- button four times and then the -1- button.
- Press -Q- button to confirm input.

Indicated on display: Number of radio-frequency keys to be adapted.


Channel 1 adaptation 1 Q
Key 1 <-1 3->


- Press -Q- button to confirm input.

Indicated on display:


Channel 1 adaptation 1 Q
Store modified value?


- Press -Q- button to confirm input.

Indicated on display:


Channel 1 adaptation 1 ->
Modified value has been stored


- Press -> button.

Indicated on display:


Rapid data transfer HELP
Select function XX


- Press one button on the radio- frequency key for at least 1 second within the next 15 seconds.
- Switch off ignition and remove ignition key.
- Perform function test of the radio- frequency key.


NOTE: Initialization is complete when the time of 15 seconds has been exceeded, no free key positions are available or the key has been adapted successfully.


Without V.A.G 1551 Scan Tool (ST)

- Insert mechanically appropriate (old) ignition key into ignition lock.
- Switch on ignition.
- Switch ignition off within 5 seconds.
- Switch ignition on again within 5 seconds.
- Using the new key (being adapted), mechanically lock the vehicle within 15 seconds (i.e. driver-side door) or lock it via the internal locking switch and then operate the radio-frequency button on the key.
- After a pause of more than one second (but within 30 seconds), operate the radio-frequency button on the key a second time.
- The adaptation procedure has been completed and is confirmed when the vehicle blinks twice.


NOTE: This adaptation fills the next free key position, i.e. the fourth in this example.