Batteries For Main Key With Radio Frequency Remote Control, Removing and Installing (Vehicles Up To 10.00)

Batteries For Main Key With Radio Frequency Remote Control, Removing And Installing (vehicles Up To 10.00)

For vehicles from 10.00







1 - Transmitter unit - upper part (turned over)
2 - Button battery
3 - Contact plate
4 - Button battery
5 - Transmitter unit - lower part
6 - Main key

In the following description, the transponder is called "Radio Unit".

Removing







- Insert screwdriver in slot between transmitter - 1 - and main key - 2 -.
- Move screwdriver in direction of arrow and unclip transmitter from main key.







- Pry apart transmitter at two locating tabs -arrows-.







- Unclip upper battery - 1 - from retainers - 2 - with screwdriver in direction of arrow.







- The contact plate - 1 - has a straight edge. When edge is turned toward retainers, contact plate can be removed.
- Contact plate can also be unclipped with screwdriver.
- Now unclip lower battery from retainers with a screwdriver.

Installing

Note polarity and correct position when installing batteries.







- Place button battery - 4 - with positive pole upward into transmitter unit (positive terminal is marked on housing).
- Place contact plate - 3 - on button battery - 4 -.
- Place battery - 2 - onto contact plate with positive terminal up and engage both.
- Place upper transmitter unit - 1 - and lower transmitter unit - 5 - together and clip together.
- Engage transmitter unit with main key.

NOTE: If battery replacement takes longer than 30 seconds, then key or keys must be synchronized. Perform function test.