Front Door Assembly Overview

Front Door

Assembly overview







NOTE: The assembly overview illustrates a front door with electric windows. The procedure is similar for doors without electric windows.

1 - Front door
2 - Inner window slot seal
- Pressed into flange
- Remove together with door trim (manual windows)
- Remove together with door trim (with power windows).

3 - Outer window slot seal
- Pressed into flange

4 - Window channel
5 - Door window
6 - Sealing profile
- Clipped and glued

7 - Trim plate
8 - Lock knob
- Screwed on

9 - Outside door handle
- Lock cylinder, removing

10 - Clip
11 - Clip
12 - Screw
- 8 Nm

13 - Lock rod
14 - Screw
- 8.0 Nm (71 in.lb)

15 - Door lock
16 - Pull rod
17 - Clip
- To fasten guide and pull rod

18 - Screw
- 7.0 Nm (62 in.lb)
- Secures regulator rail to window regulator

19 - Screw
- 7 Nm

20 - Window regulator
21 - Screw
- 7 Nm

22 - Window regulator motor
- Remove together with window regulator
- Remove window regulator crank (front door with manual regulator) together with window regulator

23 - Cover
- Clipped on

24 - Door check strap
25 - Screw
- 7 Nm

26 - Lock nut
- 6.5 Nm

27 - Bolt
28 - Boot
- Cover on vehicles with manual window regulator