Sliding Window, Retrofitting

Sliding window, retrofitting


NOTE:
- In some versions, sliding windows can be installed instead of flush-bonded windows in the sliding door, side panel of transporter and/or double cab, and side door of double cab
- The installation description is given for only one side. Directions for other side are mirror image
- Depending on equipment, remove trim and seats or seat benches.

- Remove flush bonded window.
- Cut back remainder of adhesive sealing material.

Transferring appropriate measurements to window molding and setting corner points:
Sliding door
Side panel.
Side door (double cab)
Side panel (double cab).

- Drill holes 7.5 mm dia (0.30 in.) and deburr.
- If necessary, rework holes with a round file to fit the sliding window.

- After completion of the painting/corrosion protection, install sliding window.

Sliding door, right (left is mirror image)


NOTE: Front outer edge and upper edge of sliding door are used as reference points. Arrow points in driving direction.







Dimensions:
a = 55 mm (2.16 in.)
b = 510 mm (20.07 in.)
c = 140 mm (5.51 in.)
d = 337 mm (13.26 in.)
e = 237 mm (9.33 in.)
f = 260 mm (10.23 in.)
g = 80 mm (3.14 in.)
h = 1060 mm (41.73 in.)
i = 82 mm (3.14 in.)
k = 1146 mm (45.11 in.)
l = 267 mm (10.51 in.)
m = 350 mm (13.77 in.)

Side panel, left (right is mirror image)


NOTE: Front edge of B-pillar and roof edge are used as reference points. Arrow points in driving direction.







Dimensions:
a = 52 mm (2.04 in.)
b = 510 mm (20.07 in.)
c = 135 mm (5.31 in.)
d = 340 mm (13.38 in.)
e = 310 mm (12.20 in.)
f = 107 mm (4.21 in.)
g = 1118 mm (44.01 in.)
h = 122 mm (4.80 in.)
i = 335 mm (13.18 in.)
k = 350 mm (13.77 in.)

Double cab door, right (left is mirror image)


NOTE: Rear outer edge and upper edge of hinged door are used as reference points. Arrow points in driving direction.







Dimensions:
a = 52 mm (2.04 in.)
b = 510 mm (20.07 in.)
c = 138 mm (5.43 in.)
d = 340 mm (13.38 in.)
e = 265 mm (10.43 in.)
f = 85 mm (3.34 in.)
g = 560 mm (22.04 in.)
h = 565 mm (22.24 in.)
i = 267 mm (10.51 in.)
k = 200 mm (7.87 in.)

Double cab side panel, left (right is mirror image)


NOTE: Front edge of B-pillar and roof edge are used as reference points. Arrow points in driving direction.







Dimensions:
a = 55 mm (2.16 in.)
b = 510 mm (20.07 in.)
c = 143 mm (5.62 in.)
d = 340 mm (13.38 in.)
e = 310 mm (12.20 in.)
f = 11O mm (4.33 in.)
g = 615 mm (24.21 in.)
h = 122 mm (4.80 in.)
i = 620 mm (24.40 in.)
k = 335 mm (13.81 in.)
l = 200 mm (7.87 in.)