C-Pillar Trim (Left), Removing and Installing

C-pillar Trim (Left), Removing

- Remove upper B-pillar trim.
- Remove additional equipment if present.
- Remove coat hook cap and/or pry out coat hook.
- Remove coat hook and/or Phillips screw underneath.







- Unclip and remove trim in following sequence:
- Along molded headliner - arrow A -
- Window beam - arrow B -
- Front C-pillar - arrow C -
- Rear C-pillar - arrow D -

- Pull trim from C-pillar at clips - 1 - as much as possible.

NOTE: When gluing trim in window areas (arrows - B -, - C - and - D -), unclip a little at a time, while supporting trim from back with your hand or lever tool 80-200.

C-pillar trim (left), installing







- Place trim in installed position, simultaneously ensure correct clip - 1 - positioning.
- Clip trim in window areas (arrows - B -, - C - and - D -) and into spring clips on headliner (arrow - A -).