C-Pillar Trim (Right), Removing and Installing

C-pillar Trim (Right), Removing







- Remove right upper B-pillar trim.
- Remove coat hook cap and/or Phillips screw underneath.
- Remove coat hook.
- Unclip trim in following sequence:
- Along molded headliner (arrow - A -)
- Along door guide rail (arrow - B -)
- Center bottom C-pillar, clip - 1 -
- Right side, below arrow - C -
- Left side, above arrow - D -

NOTE: When gluing trim in window areas (arrow - D -), unclip a little at a time while supporting trim from the back with your hand or lever tool 80-200.

C-pillar trim (right), installing







- Place trim in installed position while ensuring correct positioning of clips - 1 -.
- Clip trim onto C-pillar in window areas (arrow - D -) and into spring clips on headliner (arrow - A -).
- Ensure correct gasket positioning (arrow -C-).