Operation CHARM: Car repair manuals for everyone.

D-Pillar Trim (Vehicles With Passenger Compartment Ventilation / Air Conditioning System), Removing and Installing



D-pillar Trim (Vehicles With Passenger Compartment Ventilation / Air Conditioning System), Removing And Installing







1 - D-pillar trim
2 - Clamp
3 - D-ring for safety belt
- Secured with hex bolt, 40 Nm

4 - Plug
5 - Safety belt

Removing
- Remove rear headliner trim.
- Remove upper B-pillar trim on sliding door side.
- Remove C-pillar trim on sliding door side.







- Turn out or pry out plug - 1 - with screwdriver.
- Along molded headliner (arrow - A -)
- Headliner trim (arrow - B -)
- D-pillar, front (arrow - C -)
- Unhook underside (arrow - D -)

Installing







- Insert trim on lower side (arrow - D -) and bring into installation position.
- Clip D-pillar trim in clamps on headliner trim (arrow - A -) and in window area (arrows - B - and - C -).
- Seat gasket properly in area of rear lid.
- Press plug - 1 -.