Lower B-Pillar Trim, Removing and Installing

Lower B-pillar Trim, Removing And Installing







NOTE: To remove lower B-pillar trim, first remove upper B-pillar trim, right side.

1 - Crossmember piece
2 - Spring clips
- Distance of clips from cross member piece - 1 -.
- a = 120 mm (approx. 4.6 in.)
- b = 200 mm (approx. 7.8 in.)

3 - Hex bolt
- 40 Nm (30 ft lb)

4 - Automatic tensioning seat belt retractor
5 - Gasket
- After installing lower B-pillar trim, ensure correct positioning of gasket.

6 - Lower B-pillar trim
7 - Clip
- Two-piece
- Removing: Use Allen wrench
- Installing: Press outer and inner parts into hole one after the other

8 - Anchor point for seat belt