Upper B-Pillar Trim (Right), Removing/Installing

Upper B-pillar Trim (Right), Removing/Installing







- Remove seat belt anchor cap and hex screw at bottom of B-pillar.
- Unclip and remove trim in following sequence:
- Along molded headliner - arrow A -.
- Right - arrow B -.
- Left - arrow C -.

- Remove B-pillar trim starting at clip - 1 - position.

Upper B-pillar (right), sliding door side, removing and installing
- Clip trim onto B-pillar and into spring clips on headliner (arrow - A -), in installed position. Ensure correct installation of clip - 1 - and belt height adjustment mechanism.
- After installing trim, ensure correct positioning of gaskets (arrows - B - and - C -).