B-Pillar Trim Lower Right, Component Layout

B-pillar Trim Lower Right, Component Layout







NOTE: To remove lower right side B-pillar trim, remove upper B-pillar trim first.

1 - Cross member, seal
2 - Bracket
- Distance of brackets from cross member, sill - 1 -.

a = 120 mm (4.7 in)
b = 200 (7.8 in)

3 - Bolt
- 40 Nm (30 ft lb)

4 - Belt retractor
5 - Seal
- After installing trim, ensure seal sits correctly.

6 - B - pillar trim, lower
7 - Clip
- 2-part
- Removal: remove inner section with Allen wrench
- Installation: press outer and inner sections in mounting hole simultaneously

8 - Seat belt securing point