D-Pillar Trim, Removing and Installing

D-pillar Trim, Removing

- Remove rear roof frame trim, upper B-pillar trim and C-pillar trim.
- Pry out coat hook cap, remove coat hook.







- Remove recessed screw - 2 -.
- Unclip trim in the order indicated:
- Along molded headliner - arrow A -
- Window pillar - arrow B -
- D-pillar at rear - arrow C -
- Loosen clip - 1 -
- Carefully detach underside - arrow D -
- D-pillar at front - arrow E -

NOTE: Removing trim in window area - arrows B and E -, unclip in short sections, support from back by hand or with tool 80-200.

D-pillar trim, installing







- Latch trim on underside -arrow D-, position trim and ensure clip - 1 - is positioned correctly.
- Clip trim on D-pillar, on roof frame brackets - arrow A - and window area - arrows B and E -
- Ensure seal -arrow C- is positioned correctly.