Multi-Pin Harness Connectors With Terminal Assignments

Note: All terminals omitted here are not occupied at the moment and must not be connected to other components under any circumstance.





Terminal assignment of harness connectors for voltage supply and On Board Diagnostic (OBD) with VAG1551 Scan Tool (ST) or VAS5051 tester
Terminal 4 = Ground (GND) (terminal 31)
Terminal 16 = B+ (terminal 30)
Terminal 7 = K-wire to terminal 46 of T88 multi-pin connector for ABS control module (w/EDL) -J104





Terminal assignment of harness connector, T88 wiring harness / ABS control module (w/EDL) -J104-