Multi-Pin Harness Connector With Terminal Assignments

Note: All terminals omitted here are not occupied at the moment and must not be connected to other components under any circumstance.





Terminal assignment of harness connectors for voltage supply and On Board Diagnostic (OBD) with VAG1551 Scan Tool (ST) or VAS5051 tester
Terminal 4 = Ground (GND) (terminal 31)
Terminal 16 = B + (terminal 30)
Terminal 7 = K-wire to terminal 11 of T31 multi-pin connector for ABS control module (w/EDL) -J104-





Terminal assignment of T31 harness connector, wiring harness/ABS control module (w/EDL) -J104-