Heating & A/C Controls, Assembly

Heating & A/C Controls, Assembly


CAUTION!
Before beginning repairs on the electrical system:
- Obtain the anti-theft radio security code.
- Switch the ignition OK
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Repair Manual and/or Owner's Manual.


NOTE: Illustrated control from vehicle with additional (rear) heat exchanger and rear passenger compartment ventilation (where applicable).







1 - Control assembly
With:
- A/C switch -E35-
- Fresh air blower switch -E9-
- Fresh air/recirculating flap switch -E159-
- Rear heater regulation switch -E271-
2 - Illumination filter
3 - Trim
4 - Illumination bulb -L16-
- Qty: 3
5 - Rotary knob for blower fan speed
- Removing
- Pull off using pliers with rubber or plastic jaw protectors
6 - Rotary knob for air distribution
- Removing
- Pull off using pliers with rubber or plastic jaw protectors
7 - Trim
8 - Rotary knob for temperature control
- Removing
- Pull off using pliers with rubber or plastic jaw protectors