With Manufacturer Scan Tool

Diagnostic Trouble Code (DTC) Memory, Erasing (function 05)


NOTE: If DTC memory cannot be erased, check DTC memory again and repair malfunction.


Requirements
- DTC memory checked.
- All malfunctions repaired.

After successful DTC memory check:

Indicated on display:


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -5- to select function 05, "Erase DTC Memory".

Indicated on display:


Rapid data transfer Q
05 - Erase DTC Memory


- Press -Q- button to confirm input.

Indicated on display:


Rapid data transfer ->
DTC Memory is erased!


DTC memory is erased.
- Press -> button.

Indicated on display:


Rapid data transfer HELP
Select function XX


NOTE:
- Test sequence is wrong if this message is displayed.


WARNING!
DTC memory was not checked


- Test sequence is wrong if this message is displayed.


Rapid data transfer ->
DTC memory was not checked


Follow test sequence exactly: first check DTC memory, repair malfunction(s) if necessary, then erase.

End Output (function 06)

- Press buttons -0- and -6- to select function 06, "End Output".

Indicated on display:


Rapid data transfer Q
06 - End Output


- Press -Q- button to confirm input.

Indicated on display:


Rapid data transfer HELP
Enter address word XX


- Switch off ignition.
- Disconnect Data Link Connector (DLC).