With Manufacturer Scan Tool

Diagnostic Trouble Code (DTC) Memory, Checking (function 02)


NOTE: The displayed DTC in formation is updated only when initiating OBD or with "Erase DTC Memory" function 05.


- Switch printer on via the PRINT button (indicator lamp in button lights up).

Indicated on display:


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -2- to select function 02," Check DTC Memory".

Indicated on display:


Rapid data Transfer Q
02 - check DTC Memory


- Press -Q- button to confirm input.

The number of stored malfunctions is indicated.


X malfunctions recognized!


DTCs are displayed and printed out in sequence.

- Refer to DTC table and repair malfunctions as necessary. Immobilizer System

If "No DTC recognized" is displayed, the program will return to the start position after the -> button is pressed.


No malfunction recognized! ->


Indicated on display:


Rapid data transfer HELP
Select function XX


If something else is displayed:
- End Output (function 06).
- Switch off ignition and disconnect Data Link Connector (DLC).