Components In Enggine Compartment Servicing Climatronic

Climatronic Components In Engine Compartment, Servicing

CAUTION! Before beginning repairs on the electrical system:

- Obtain the anti-theft radio security code.
- Switch the ignition off.
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Repair Manual and/or Owner's Manual.

NOTE: System components identified with an * must only be serviced or replaced after discharging refrigerant system. Use Kent Moore ACR4 or equivalent.

A/C cut-out thermal switch -F163- and Third Speed Coolant Fan Control (FC) Thermal Switch -F165- engine code AES & AXK, removing and installing






WARNING!
Cooling system is pressurized when engine is warm. Before performing repairs, wear gloves, goggles and other appropriate protection while slowly and carefully releasing system pressure.

- Refill with coolant after replacing switch.

1 - Clip
2 - Thermostat housing
3 - 0 ring
4 - A/C cut-out thermal switch -F163- & third speed coolant fan control (FC) thermal switch -F165-
5 - Engine coolant temperature (ECT) sensor -G2- & after run coolant fan control (FC) -F87.
6 - Engine coolant temperature (ECT) sensor -G62-