Clutch - Binding or Shifting Problems
83VW01Applies To ALL WATERCOOLED
WITH MANUAL TRANSMISSION
Group 30
Subject Clutch Binding-Shifting Problems Part Identifier N/A
Key Points Lubricate splines of clutch disc/main shaft and release bearing guide sleeve
C
Number
83-03 August 12, 1983
Corrosion or insufficient lubrication of clutch disc/mainshaft splines, and release bearing guide sleeve on 013/014 transmissions, may cause clutch binding or shifting problems.
Repair Procedure
- remove transmission
- disassemble clutch assembly, inspect parts, and replace worn components clean mainshaft/clutch disc splines and coat with MOS2 grease For transmission 013/014, also perform the following:
- inspect release bearing guide sleeve and replace if worn. Coat with Molykote(R) spray or equivalent
- grease contact area of clutch release bearing
- reinstall transmission and check operation