Engine, Cooling and Exhaust: Technical Service Bulletins
- Recalls
- Customer Interest
- Fuel System - Poor Engine Performance
- Coolant Pump - Leakage, Warning Lamp On, Residue
- Radiator Fan - Stays On High Speed When Extremely Cold
- Engine - Hot Start Difficulties
- Alternator - V Belt Slips Under Load
- Oil Dipstick Tube - Loose Fit on Remanufactured Engines
- Coolant Temperature Gauge Light - Flashes
- Exhaust Swivel Joint - Squeaks While Driving
- Coolant Indicator LED - Flashing At Normal Temp
- MIL ON - Poor Idle/Stalls, Loss of Power, Exhaust Smoke
- By Symptom
- Continuous fan operation
- Customer Interest
- Fuel System - Poor Engine Performance
- Coolant Pump - Leakage, Warning Lamp On, Residue
- Radiator Fan - Stays On High Speed When Extremely Cold
- Engine - Hot Start Difficulties
- Alternator - V Belt Slips Under Load
- Oil Dipstick Tube - Loose Fit on Remanufactured Engines
- Coolant Temperature Gauge Light - Flashes
- Exhaust Swivel Joint - Squeaks While Driving
- Coolant Indicator LED - Flashing At Normal Temp
- MIL ON - Poor Idle/Stalls, Loss of Power, Exhaust Smoke
- Driveability
- False instrument warning light/gauges
- Inoperative
- Leaks
- Loose
- Noise
- Odors
- Poor performance
- Recalls
- Starting problems
- All Technical Service Bulletins
- Fluids and Lubricants - Warranty Reimbursements
- Tools - Engine/Transmission Oil Temperature Tester
- Engine - Oil Consumption
- Tools - Support to Remove/Install Engine, Transmission
- Fuel System - Poor Engine Performance
- Recall 87V053000: Fuel Pump Seizure
- Recall - Heater Core Replacement
- Recall 92V050000: Heater Core Rupture
- Engine - Attach Pressure Plate or Flywheel to Crankshaft
- Coolant Hoses, Flange, Clamps - Updated
- Coolant Pump - Leakage, Warning Lamp On, Residue
- Radiator Fan - Stays On High Speed When Extremely Cold
- Engine - Hot Start Difficulties
- Alternator - V Belt Slips Under Load
- Oxygen Sensor - Failure Due to Silicone
- CIS W/OXS System - New Checking/Adjusting Procedures
- Sensor Plate Lever - Basic Adjustment
- Exhaust - Sulfur Odor Noticed At the Pipe
- Oil Dipstick Tube - Loose Fit on Remanufactured Engines
- Coolant Temperature Gauge Light - Flashes
- Exhaust Swivel Joint - Squeaks While Driving
- Glow Plug - Correct Torque
- Engine - Approved Oil And Additives
- Water Pump Pulley - Correct Installation of Pulley
- Coolant - Revision
- Coolant Indicator LED - Flashing At Normal Temp
- Hydraulic Engine Mount - Installation of New Unit
- Crankshaft Drive Sprocket Bolt - Changed
- MIL ON - Poor Idle/Stalls, Loss of Power, Exhaust Smoke