Lifting Vehicle With Hoist/Floor Jack

Lifting Vehicle with Hoist/Floor Jack

WARNING: When removing components such as rear axle, fuel tank, spare wheel and rear lid, place additional weight on rear end of car or anchor car to hoist to prevent tipping if center of gravity changes.

CAUTION:
- Before driving over lift check for clearance between lifting arms and tires to avoid cutting sidewalls.
- Extend arms and check to see if arms are long enough to contact lifting points.
- Lift only at points shown.




Front
at lifting point under hinge pillar




Rear
on flat surface forward of rear axle mounts

NOTE: When lifting vehicle with floor jack use same lifting points as with hoist.

CAUTION: Do not lift vehicle by engine, transmission, front or rear suspension. Doing so may result in damage to components.