Auxiliary Air Regulator Hose - Rubbing On Battery Tray
89vw07SUBJECT:
Auxiliary air regulator hose rubbing on battery tray, correcting
GROUP
25
NUMBER
89-01 July 31, 1989
MODEL(S):
Fox, before VIN KP 013 639
Additional clearance can be obtained between the auxiliary air regulator hose and the battery tray by rotating the regulator hose as follows:
^ remove intake air boot
^ loosen both hose clamps A
^ rotate hose 90~ towards engine (this should increase clearance)
^ tighten hose clamps A
^ reinstall intake air boot
CAUTION
Use care during intake air boot installation to avoid pushing the curved screen onto the sensor plate.