M/T - When Replacing, Match Flanges to Driveshafts
90vw09Subject: Flanges on Remanufactured Transmissions
Model(s): All with 020 Transmissions
Group: 40
Number: 40-90 T01
Date: May 31, 1990
Remanufactured transmissions are assembled with either 90 mm or 100 mm flanges. When you replace a transmission with a rebuilt unit; do not replace drive shafts to match to the flanges. Instead replace the flanges to match to the drive shafts.
In case of replacement, remove the new flanges from the rebuilt unit and exchange them for new flanges that match the existing drive shafts. Your Parts Department will provide you with the exchange flanges. Also, please remember to use new flange seals.