Suspension: Description and Operation

Front

Fig. 1 Front suspension.:

Fig. 2 Front suspension.:

Fig. 3 Front suspension.:

These vehicles use a MacPherson strut type front suspension. The upper part of strut is attached to the upper fender reinforcement. On Quantum and Fox models, the wheel bearing housing is integral with the strut assembly and is attached to the lower control arm through a ball joint, Fig. 1. On all models except Quantum and Fox, the strut and wheel bearing housing are separate and distinct parts, with the strut attached to the housing with through bolts. The assembly is attached to the lower control arm through a ball joint, Figs. 2 and 3. During steering maneuvers, the strut and housing rotate as an assembly.
The driveshafts are attached inboard to the transaxle output drive flanges and outboard to the driven wheel hub.