Multi Point Connector

REMOVAL

Removing And Installing Multi Point Connector:

^ Pull open locking slide 1 on back of fuse/relay panel in direction of arrow.

^ Depress locking clip arrow and pull multi-point connector from fuse/relay panel.

INSTALLATION

Removing And Installing Multi Point Connector:

^ Insert connector so that locking pins 2 face locking slide 1.

^ Push multi-point connector into appropriate location 4 until locking clip 3 engages.

^ Push locking slide 1 in direction of arrow until locked.

NOTE:
Fully insert all multi-point connectors into the fuse/relay panel before engaging locking slide 1.