Relay Panel

Removing And Installing Fuse/Relay Panel:

THE FUSE/RELAY PANEL IS LOCATED UNDERNEATH THE LEFT SIDE OF THE INSTRUMENT PANEL.

^ Remove lower instrument panel trim.

^ Spread retaining clips 1 to disengage lock pins 2 from brackets 4.

^ Swing retaining clips 1 forward and pull from fuse/relay panel pins 3.

^ Spread left retaining bracket 4 and disengage from pin 5.

^ Remove fuse/relay panel from brackets 4.

^ Install in reverse order of removal making sure pin 5 and retaining pins 2 engage proper recesses in brackets 4.