Flywheel and Sealing Flange Removing and Installing

Flywheel and Sealing Flange Removing and Installing





1 - O-ring
- To remove, remove sealing flange
- Install using tool 10-203
- Lightly oil the sealing lip
2 - O-ring
3 - 25 Nm (18 ft lb)
4 - Sealing flange
5 - Gasket
- Replace
6 - Cylinder block
7 - 60 Nm (44 ft lb) + 1/4 turn
- Replace
8 - Flywheel/drive plate
- To lock while removing or installing use tool 10-201
- To add an ignition timing mark, See "Inscribing Ignition Timing Mark on Flywheel". Inscribing Ignition Timing Mark on Flywheel
- To remove or install the drive plate for automatic transmission, See "Drive Plate Removing and Installing". Drive Plate Removing and Installing
9 - Intermediate plate
- Must fit on sleeves
- Do not damage or bend while assembling
10 - 10 Nm (7 ft lb)
11 - Sealing flange with O-ring
- Replace as an assembly
12 - Intermediate shafts
- Axial play: 0.25 mm maximum
13 - O-ring
- Replace if damaged
14 - Sealing flange intermediate shaft
15 - 25 Nm (18 ft lb)