Clutch Pedal - Adjustment After Disc Replacement
Group: 30Number: 92-01
Date: Jan. 31, 1992
Subject:
Clutch Pedal Adjustment After Clutch Disc Replacement
Model(s):
Fox, from 1991 m.y.
Production Change
Revised clutch system eliminates clutch free play after:
VIN 30 MP 004 206
Service
When repairing clutch systems on vehicles after VIN 30 MP 004 206, the following new parts are applicable:
^ Clutch Release Shaft Lever Part No. ZBA 141 719
^ Clutch Fork
Part No. 013 141 701 1
^ Tensioning Spring Part No. 305 721 449 2
Note
This system has eliminated the clutch pedal stop and the release lever return spring.
When installing a new clutch disc, adjust the clutch pedal height at the left engine mount (arrow), for 10 mm below brake pedal. (See Illustration 30-139)
CAUTION
The position of the clutch pedal MUST NEVER be higher than the brake pedal.
CAUTION
Part numbers are for reference only. Always check with your Parts Department for latest information.