Instrument Cluster / Carrier: Service and Repair

1. Disconnect battery ground cable.
2. Remove steering wheel, refer to Steering and Suspension/Steering/Steering Wheel/Service and Repair.
3. Remove radio or storage tray, heater control knobs, and control trim plate.
4. Remove screws securing [1][2]instrument cluster bezel and pull bezel away from dash.
5. If equipped, press switches out of bezel and remove bezel.
6. Remove screws securing [1][2]instrument cluster, disconnect wiring harness connectors and speedometer cable, then remove cluster.
7. Reverse procedure to install, ensuring that steering wheel is properly centered.