Intake Air System, Component Layout

C- See section "Fuel Injection System Repairing"
D- See section "Fuel Injection Components, Layout"
E- See section "Fuel Injection Components, Layout"
F- See section "Fuel Injection Components, Layout"

1- From carbon canister
2- Harness connector
gray
3- Carbon canister solenoid valve I (N 80)**
- gray
- resistance 30 to 60 Ohms
4- Carbon canister solenoid valve II (N 115)
- black
5- Harness connector
black
6- 3.5 Nm (31 In. lb)
7- Mounting bracket
8- Mounting bracket
for fuel pressure regulator
9- Air flow sensor
- air flow sensor potentiometer (G 19)*
10- Gasket
always replace
11- Warm air intake
hose to heat shield from exhaust manifold
12- Adaptor tube
13- Control flap
- not available as an individual part
14- Air filter housing lower section
15- Cold air intake
16- Air filter element
17- Air filter housing upper section
18- Harness connector
white
19- CO adjustment plug
- CO adjusting screw underneath
20- Intake air boot